If the IP address of the desired port is not displayed in [Available network
printers], enter the IP address speciﬁed using NetSpot Device Installer, the ARP/
PING command, or the Printer Status Window, and then click [Add].
When using the unicast communication mode (If you have selected the [Use the
Unicast Communicate Mode] check box on the installation of Canon CAPT Print
Monitor), display screens and operation procedure are different. For more details,
see "Using the Unicast Communication Mode" (p. 5-12) or ask your network
The installation of the printer driver is completed. If you want to conﬁgure the protocol
settings, see "Protocol Settings for the Printer," on p. 2-60.
Installing the CAPT Software