❑
Specify the IP address.
Options to be specified
[IP Address Setting with]:
[IP Address]:
Options to be specified as needed
[Subnet Mask]:
[Gateway Address]:
[Broadcast Address]:
Select the method for setting the IP address.
[Manual
Allows you to specify the IP address
Setting]:
directly. The IP address entered in
[IP Address] is specified for the
network board.
[DHCP]:
Obtains an IP address using DHCP.
(The DHCP server needs to be
started up.)
Enter the IP address of the network board.
Enter the subnet mask that is being used on the
TCP/IP network.
Enter the gateway address that is being used on
the TCP/IP network.
Enter the broadcast address that is being used
on the TCP/IP network.
Installing the CAPT Software
2
2-19