Managing The Printer From A Computer; Managing The Printer With Netspot; Managing The Printer With A Web Browser (Remote Ui); Managing The Printer With An Ftp Client - Canon N2000 Network Manual

Managing the Printer from a Computer

Managing the Printer with NetSpot

Managing the Printer with a Web Browser (Remote UI)

Managing the Printer with an FTP Client

2-38
TCP/IP Network Settings (Windows)
You can use the following software applications on the computer to check
the printer status and perform printer settings:
• NetSpot
• Web Browser (Remote UI)
• FTP Client
You can use NetSpot installed on a computer to control the printers
connected to the network. For details about how to start NetSpot, see page 2-
9.
You can use the Remote UI function built into the network interface board to
manage the printer with a Web Browser. For more details about how to set
up and use the Remote UI feature, see "Setting TCP/IP Protocol with a Web
Browser (Remote UI)" (
Follow the procedure below to enable managing the printer with the FTP
client. You can also use the FTP client to print files from the printer, perform
version updates of the printer firmware for the printer network module, and
perform other important functions.
The examples of entries and settings below are for the English operating
system.
1
Start at the MS-DOS prompt or command line.
2
Enter the following command:
ftp <Printer IP address>
P.2-14)