Verifying Network Security Information - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring Network Security

Verifying Network Security Information

To display information about Network Security configuration settings, use the show commands listed in
the following table:
show netsec summary
show netsec traffic
show netsec statistics
show netsec config
show netsec operation
show netsec group port
For more information about the resulting display from these commands, see the OmniSwitch CLI Refer-
ence Guide.
page 47-8
Displays the anomaly check summary.
Displays the anomaly specific traffic statistics.
Displays the pattern counts on ports.
Displays the current network security configurations.
Displays the network security operational conditions.
Displays the group membership of ports.
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Network Security
September 2009