Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 1024

IPMVLAN Application Example
4
Create a receiver port in the Enterprise mode of IPMVLAN by entering:
-> vlan ipmvlan 1003 receiver-port port 1/51-60
An example of what these commands look like when entered sequentially on the command line:
-> vlan ipmvlan 1003 name "multicast vlan"
-> vlan ipmvlan 1003 address 225.0.0.1
-> vlan ipmvlan 1003 sender-port port 1/50
-> vlan ipmvlan 1003 receiver-port port 1/51-60
As an option, you can use the
config commands to confirm your settings. For example:
-> show vlan
vlan type
+----+-----+-----+-------+----------+------+----+-----+-----+---------+
1 std
2 ipmtv
3 ipmtv
4 vstk
-> show vlan ipmvlan 10 address
IpAddress
----------+---------------
224.1.1.1
224.1.1.2
224.1.1.3
ffae::1
ffae::2
ffae::3
-> show vlan ipmvlan 10 port-config
port type
+------+------------+
1/10 sender
1/20 receiver
1/30 receiver
1/49 receiver
+-------------------+
page 43-14
show vlan, show vlan ipmvlan
stree
admin oper 1x1 flat
on on on on
on on off off
on on off off
on on on on
ipAddressType
Ipv4
Ipv4
Ipv4
Ipv6
Ipv6
Ipv6
OmniSwitch AOS Release 6 Network Configuration Guide
Configuring IP Multicast VLAN
address, and show vlan ipmvlan port-
mble
auth ip ipx tag
off NA off off
off NA off off
off NA off off
off NA off off
name
VLAN 1
IPMVLAN 2
IPMVLAN 3
SVLAN 4
September 2009