Switch Logging Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Using Switch Logging

Switch Logging Defaults

The following table shows switch logging default values.
Global Switch Logging Defaults
Parameter Description
Enabling/Disabling switch logging
Switch logging severity level
Enabling/Disabling switch logging
Output
Switch logging file size
OmniSwitch AOS Release 6 Network Configuration Guide
CLI Command Default Value/Comments
swlog Enabled
swlog appid level Default severity level is info. The numeric
equivalent for info is 6
swlog remote Flash Memory and Console
command-log
swlog output flash 128000 bytes
file-size
September 2009
Switch Logging Defaults
page 46-3