Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual page 1063

Software release 6
Hide thumbs Also See for OmniSwitch 6850-48:
Table of Contents

Advertisement

Configuring Server Load Balancing
Note
See
page 44-4
.
The show ip slb cluster server command provides detailed configuration information and statistics for
individual SLB servers. To use the show ip slb cluster server command, enter the command, the name of
the SLB cluster that the server belongs to, server, and the IP address of the server. For example, to display
statistics and parameters for a server with an IP address of 10.123.11.14 that belongs to an SLB cluster
called "Web_Server" you would enter:
-> show ip slb cluster Web_Server server 10.123.11.14
A screen similar to the following will be displayed:
Cluster Web_Server
VIP: 10.123.11.14
Server 10.123.11.4
Admin weight
MAC addr
Slot number
Port number
Admin status
Oper status
Availability time (%)
Ping failures
Last ping round trip time (milliseconds): 20,
Probe status
In the example above, the server with an IP address of 10.123.11.4 is shown to be administratively
enabled and "in service" (i.e., this server is being used for SLB cluster client connections) with the
administrative weight assigned as 3.
The show ip slb probes command provides both a global view of SLB probes and a detailed
configuration information and statistics for individual probes. For example, to view the status of all probes
enter show ip slb probes as shown below:
-> show ip slb probes
Probe Name
-----------------------+-------+-------+--------+------
web_server
mail_server
mis_servers
In the example above there are three probes configured on the switch.
To view detailed information on a single probe enter show ip slb probes followed by the probe name as
shown in the example below:
-> show ip slb probes phttp
Probe phttp
Type
Period (seconds)
Timeout (milliseconds)
Retries
Port
Username
Password
Expect
OmniSwitch AOS Release 6 Network Configuration Guide
and
page 44-6
for samples of the show ip slb cluster command output.
Period
Retries Timeout Method
60000
60000
3600000
: HTTP,
: 60,
: 3000,
: 3,
: 0,
: ,
: ,
: ,
Displaying Server Load Balancing Status and Statistics
: 3,
: 00:00:1f:40:53:6a,
: 1,
: 4,
: Enabled,
: In Service,
: 95,
: 0,
: ,
3
12000
HTTP
3
3000
SMTP
5
24000
Ping
September 2009
page 44-37

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents