Port Mirroring Overview; Port Mirroring Specifications; Port Mirroring Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Diagnosing Switch Problems

Port Mirroring Overview

The following sections detail the specifications, defaults, and quick set up steps for the port mirroring
feature. Detailed procedures are found in

Port Mirroring Specifications

Platforms Supported
Remote Port Mirroring
Ports Supported
Mirroring Sessions Supported
N-to-1 Mirroring Supported
Range of Unblocked VLAN IDs

Port Mirroring Defaults

The following table shows port mirroring default values.
Global Port Mirroring Defaults
Parameter Description
Mirroring Session Creation
Protection from Spanning Tree
(Spanning Tree Disable)
Mirroring Status Configuration
Mirroring Session Configuration
Mirroring Session Deletion
OmniSwitch AOS Release 6 Network Configuration Guide
"Port Mirroring" on page
OmniSwitch 6400, 6800, 6850, 6855, and 9000
OmniSwitch 6400, 6850, 6855, and 9000
Ethernet (10 Mbps)/Fast Ethernet (100 Mbps)/
Gigabit Ethernet (1 Gb/1000 Mbps)/10 Gigabit Ethernet
(10 Gb/10000 Mbps).
Two sessions supported per standalone switch and stack.
24 to 1 (OmniSwitch 6800)
128 to 1 (OmniSwitch 6400, 6850, 6855, and 9000)
1 to 4094
CLI Command
port mirroring source destination
port mirroring source destination
port mirroring source destination
port mirroring
port mirroring
September 2009
Port Mirroring Overview
45-14.
Default Value/Comments
No Mirroring Sessions
Configured
Spanning Tree Enabled
Enabled
Enabled
No Mirroring Sessions
Configured
page 45-3