Taking A Server Off Line - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring Server Load Balancing

Taking a Server Off Line

You can administratively disable a server in an SLB cluster and take it off line with the
cluster command by entering ip slb server, the IP address of the server you want to disable in dotted
decimal format, cluster, the name of the SLB cluster to which the server belongs, and admin status
disable.
For example, to administratively disable a server with an IP address of 10.105.16.123 that belongs to an
SLB cluster called "Web_Server", you would enter:
-> ip slb server ip 10.105.16.123 cluster Web_Server admin status disable
OmniSwitch AOS Release 6 Network Configuration Guide
Taking Clusters and Servers On/Off Line
September 2009
ip slb server ip
page 44-31