Adding The Loopback Adapter Driver To A Windows 2000 Server - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Configuring the Server Farm

Adding the Loopback Adapter Driver to a Windows 2000 Server

Follow the steps below to add the Microsoft loopback adapter driver to a Windows 2000 server.
1
Open the Control Panel window by clicking the Start button and then selecting Settings.
2
Double-click the Add/Remove Hardware icon in the Control Panel window.
Double-click the "Add/
Remove Hardware" icon.
3
Click the Next button in the Add/Remove Hardware Wizard window.
4
Click the Next button.
5
Select the Add/Troubleshoot a device radio button in the Add/Remove Hardware Wizard window.
Select the
"Add/Troubleshoot a
device" radio button.
6
Click the Next button.
page 44-18 OmniSwitch AOS Release 6 Network Configuration Guide
Configuring Server Load Balancing
Click "Next" when
ready.
Click "Next" when
done.
September 2009