Port Monitoring Overview; Port Monitoring Specifications; Port Monitoring Defaults - Alcatel-Lucent OmniSwitch 6850-48 Network Configuration Manual

Diagnosing Switch Problems

Port Monitoring Overview

The following sections detail the specifications, defaults, and quick set up steps for the port mirroring
feature. Detailed procedures are found in

Port Monitoring Specifications

Platforms Supported
Ports Supported
Monitoring Sessions Supported
File Type Supported

Port Monitoring Defaults

The following table shows port mirroring default values.
Global Port Monitoring Defaults
Parameter Description
Monitoring Session Creation
Monitoring Status
Monitoring Session Configura-
tion
Port Monitoring Direction
Data File Creation
Data File Size
File Overwriting
Time before session is deleted
OmniSwitch AOS Release 6 Network Configuration Guide
"Port Monitoring" on page
OmniSwitch 6400, 6800, 6850, 6855, and 9000
Ethernet (10 Mbps)/Fast Ethernet (100 Mbps)/
Gigabit Ethernet (1 Gb/1000 Mbps)/10 Gigabit
Ethernet (10 Gb/10000 Mbps).
One per switch and/or stack of switches.
ENC file format (Network General Sniffer Net-
work Analyzer Format)
CLI Command
port monitoring source
port monitoring source
port monitoring source
port monitoring source
port monitoring source
port monitoring source
port monitoring source
port monitoring source
September 2009
Port Monitoring Overview
45-24.
Default Value/Comments
No Monitoring Sessions
Configured
Disabled
Disabled
Bidirectional
Enabled
16384 Bytes
Enabled
0 seconds
page 45-5