Switch Logging Specifications
Switch Logging Specifications
Platforms Supported
Functionality Supported
Functionality Not Supported
Logging Devices
Application ID Levels Supported
Severity Levels/Types Supported
page 46-2
OmniSwitch 6400, 6800, 6850, 6855, and 9000
High-level event logging mechanism that forwards
requests from applications to enabled logging
devices.
Not intended for debugging individual hardware
applications.
Flash Memory/Console/IP Address
IDLE (255), DIAG (0), IPC-DIAG (1), QDRIVER
(2), QDISPATCHER (3), IPC-LINK (4), NI-
SUPERVISION (5), INTERFACE (6), 802.1Q (7),
VLAN (8), GM (9), BRIDGE (10), STP (11),
LINKAGG (12), QOS (13), RSVP (14), IP (15),
IPMS (17), AMAP (18), GMAP (19), SLB(25),
AAA (20), IPC-MON (21), IP-HELPER (22),
PMM (23), MODULE (24), EIPC (26), CHASSIS
(64), PORT-MGR (65), CONFIG (66), CLI (67),
SNMP (68), WEB (69), MIPGW (70), SESSION
(71), TRAP (72), POLICY (73), DRC (74), SYS-
TEM (75), HEALTH (76), NAN-DRIVER (78),
RMON (79), TELENET (80), PSM (81), FTP (82),
SNMI (83), DISTRIB (84), EPIL0GUE (85),
LDAP (86), NOSNMP (87), SSL (88), DBGGW
(89), LANPOWER (108)
2 (Alarm - highest severity), 3 (Error),
4 (Alert), 5 (Warning) 6 (Info - default),
7 (Debug 1), 8 (Debug 2), 9 (Debug 3 - lowest
severity)
OmniSwitch AOS Release 6 Network Configuration Guide
Using Switch Logging
September 2009