Access Configuration - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Chapter 2 DSAM Operation
Configuring the Meter
Use the Help system on your DSAM to learn more about
each configuration mode. Press SHIFT+? to find out what
each option does, how it works, how to configure it, how to
interpret the results, and more.
Access
To view the CONFIGURE ACCESS menu (Figure 12),
Configuration press the CONFIGURE mode key (Figure 3 on page 16),
then press the Access softkey.
Figure 12 Configure Mode Access Menu
Use pc connection to select your preferred PC connection
(Ethernet or RF) and to define its IP address.
Use the WFA browser settings to enter the preferred
ethernet or RF connection, home URL, proxy server
parameters (optional) and CM diagnostic web page infor-
mation.
Use the Help system on your DSAM to learn more about
each configuration mode. Press SHIFT+? to find out what
each option does, how it works, how to configure it, how to
interpret the results, and more.
DSAM Product Family Quick-Start Guide Rev. G 25