Battery Safety - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Battery Safety

DSAM Product Family Quick-Start Guide Rev. G
WARNING:
Do not disassemble the meter.
Do not attempt to service this product yourself. There
are no user-serviceable parts inside. Contact the
appropriate JDS Uniphase Corporation representative
for meter repair or calibration.
Follow these safety precautions to reduce the risk of fire,
shock, or personal injury and to avoid damage to the
DSAM battery:
These safety precautions apply to the use of either the
NiMH battery or the Li-Ion battery supporting the DSAM
meter.
1 Power the meter only with battery types approved for
use by JDS Uniphase Corporation.
2 Do not disassemble or attempt to service the battery.
3 Do not place the battery on a conductive surface.
4 Do not allow metal objects to touch the battery
contacts.
5 Charge the battery only with the specified charger.
6 Keep the battery away from heat sources near or
above 60° C (140° F).
7 Operate and store the battery only within the following
ranges:
Chapter 1 Saftey Instructions
Important Safety Instructions
3