Access Configuration - JDS Uniphase Wavetek DSAM-3500B Quick Start Manual

Chapter 2 DSAM Meter Operation
Configuring the Meter
Access
Configuration
28
To view the Configure Access menu
Configure mode key
the Access softkey.
Figure 14 Configure Mode Access Menu
Use pc connection to select your preferred PC connection
(Ethernet or RF) to TPP or FDM and to define its IP
address.
Use WFA browser settings to enter the preferred ethernet
or RF connection, home URL, proxy server parameters
(optional) and CM diagnostic web page information.
The pc connection is a critical setting for connecting to the
TPP or FDM-100 for meter configuration.
Refer to "DSAM Firmware Upgrade Instructions" on
page 49.
DSAM Product Family Quick-Start Guide Rev. 001
(Figure
(Figure 5 on page
14), press the
18), then press