Displaying The Access Browser Menu - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Chapter 2 DSAM Operation
Using Access Mode
DIsplaying the
Access
Browser menu
42
with the software to receive firmware upgrades. Synchro-
nize using the Ethernet port on the top of the meter. If only
measurement files or channel plans are being synchro-
nized you may also synchronize over RF.
To display the ACCESS BROWSER menu
press the ACCESS mode key
press the Browser softkey. Use the arrow keys to highlight
the task you wish to perform and press ENTER.
Figure 24 Access Browser Menu
Use Access Browser menu to select:
– WFA browser - used to save, send, and receive
various applications and system information,
– local browser - used to open a saved Browser page,
and
– web access test - The Web Access Test connects to
an JDS Uniphase Corporation test page on the
internet to ensure internet connectivity. It accesses a
single screen for view only.
DSAM Product Family Quick-Start Guide Rev. G
(Figure
(Figure 3 on page
24),
16), then