Connecting The Power Components - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Chapter 2 DSAM Operation
Initial Set-Up
Connecting
the power
components
10
To remove the battery, hold the meter in the manner
described above and press the release button located
directly above the battery in the center of the back of the
meter. When released, gently pull the battery out of the
cavity in the back of the meter.
In addition to the battery, three power components have
been shipped with your DSAM -- a charger module, a
universal power supply module, and a power cord.
IMPORTANT:
Read all safety instructions in the front of this guide
before attempting to power the meter or charge the
battery (see "Important Safety Instructions" on page
DSAM Product Family Quick-Start Guide Rev. G
2).