Cloning Dsam Meters - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Cloning DSAM Meters

DSAM Product Family Quick-Start Guide Rev. G
Use the Help system on your DSAM to learn more about
each Access mode. Press SHIFT+? to find out what each
option does, how it works, how to configure it, how to inter-
pret the results, and more.
Use the CLONE feature to transfer DSAM settings from or
to this meter.
The Help system offers additional instruction about these
tasks.
To access the CLONE configuration screen
1 Press the CONFIGURE mode key.
2 To display the Configure General mode menu
(Figure 9 on page
3 Use the arrow keys to highlight Clone.
4 Press ENTER.
Figure 25 Configure General Clone Screen
Chapter 2 DSAM Operation

Cloning DSAM Meters

21), press GENERAL softkey.
(Figure 25),
43