Spectrum Measurement Menu - JDS Uniphase Wavetek DSAM Series Quick Start Manual

Spectrum
Measurement
Menu
DSAM Product Family Quick-Start Guide Rev. G
– Ethernet - (optional purchase required) analyzes the
internet protocol (IP) performance through the
Ethernet,
– CM Diagnostics page - (optional purchase required)
displays a cable modem's internal web page, and
– VoIP - (optional purchase required) provides the
ability to measure voice quality of your VoIP networks
and gateway, internet protocol (IP) phones and other
end point devices.
Use the Help system on your DSAM to learn more about
each measurement mode. Press SHIFT+? to find out what
each option does, how it works, how to configure it, how to
interpret the results, and more.
To view the MEASURE SPECTRUM menu
press the MEASURE mode key
then press the Spectrum softkey. Use the arrow keys to
highlight the type of measurement you wish to perform and
press ENTER to access that option.
Here's another quick way to access Measure mode
options: Press the SHIFT key to display the options above
each softkey and press the softkey directly under the
option of your choice.
Chapter 2 DSAM Operation
Using Measure Mode
(Figure
(Figure 3 on page
14),
16),
29