Table of Contents
Advertisement
21128026 R001 DSAM Help User Guide.book Page 15 Thursday, February 5, 2009 2:02 PM
Connecting the
Power
Components
High Capacity Battery
to External Power
Connection
DSAM Help User Guide
Battery Release
Button
Battery
Figure 9
DSAM Product Family Series Field Meter (Rear
View)
4 When released, gently pull the battery out of the cavity in the back
of the meter.
In addition to the battery, the following power components are supplied
with the DSAM Product Family Series:
– Charger module
– Power cord
IMPORTANT
Read all safety instructions in the front of this guide before attempt-
ing to power the meter or charge the battery
Instructions" on page
304).
If a high capacity battery was provided with your DSAM you also
receive three additional power components with your DSAM Product
Family Series -- a 12 volt DC universal power supply module, a power
cord, and a 12-volt DC in-vehicle power cable.
IMPORTANT
Read all safety instructions in the front of this guide before attempt-
ing to power the meter or charge the battery
Instructions" on page
304).
To connect the external power components
the DSAM Product Family Series battery
Rev. 001
Chapter 3 Battery Installation
Installing and Maintaining the EZ Charge Battery
("Important Safety
("Important Safety
(Figure 10 on page
16) to
15
Advertisement
Table of Contents
