Table of Contents
Advertisement
Chapter 12. Maintenance and Repair Instructions
Warning: "Turn off power or push E-STOP button before maintenance"
While using machines, the operational manual must be read carefully and thoroughly. Machine must be
maintained properly periodically. In the event of malfunction, abnormality, please refer to following table for
trouble shooting. All maintenance and repair must be operated by qualified technicians or operators. While
maintaining or repairing, the power must be turned off, the caution stand must be placed, and unrelated
persons must be kept away from.
12-1. Insufficient Sawing Pressure
ITEM 1 a
Malfunction
Cause
Trouble
shooting
Remark
Insufficient sawing pressure
a. Oil pipe blocked
a. check if there is any dirt, dust, object inside the pressure adjusting valve, clean it
or replace the oil as illustration:
1 Pressure Adjusting Knob
Pressure Adjusting
4
Screw
Steel Ball/Sphere
7
Contact
○
Dismantle
section to see if there is any dirt, dust, or other object
7
Refer to manual, or contact local dealer/producer for prompt service
2 Scale
Steel Ball
5
Washer
8 Steel Ball
54
Pressure Adjusting
3
Spring
6 Adjusting Spring Ring
9 High Pressure Hose
Advertisement
Table of Contents
Need help?
Do you have a question about the KP-200 and is the answer not in the manual?