Excel KP-200 Operation & Maintenance Manual page 10

KP-200 Oiling point/method/period
ITEM REPLENISHING POINT
1 Bearings inside the chin
2 Between main gear and
saw frame
3 Saw frame
4 Oil tank
5 Cooling oil tank
OILING
PERIOD
Check Injecting lubrication oil by pushing injecting gun by 5
Everyday times, avoid spilling and clean it if any
Check Injecting lubrication oil by pushing injecting gun by 7
Everyday times, avoid spilling and clean it if any
Check Injecting lubrication oil by pushing injecting gun by 5
Everyday times, avoid spilling and clean it if any
Check Every Injecting by hydraulic oil below maximum level to avoid
week spilling
Check Every Pouring cutting oil into the cooling oil tank, below
week maximum level to avoid spilling
4
OILING METHOD