Replacement Of Cutting Liquid - Excel KP-200 Operation & Maintenance Manual

9-5. Replacement of Cutting Liquid

Cutting liquid may affect the precision, lift of blade, which must be replaced periodically as following steps:
a. Turn off safety switch and place a caution mark to avoid danger before maintenance
b. Remove protection covers
illustration
○
c. Use a crow driver
wrench to release the fixed nut
d. Take out the power cable and place it in higher place to avoid wetting by cutting liquid, which may cause
electric shock
e. Use a 5mm T shape wrench
f. Take out the pumper out and place it in a proper place
g. As following illustration, put a oil tank
○
,
the oil tank do not spill the liquid
2
h. After extracting up, use a shaver
dust into a proper container to avoid pollution
i. Then, clean the filter using an air compressor as figure 1, finally, use a cloth to clean the filter thoroughly, as
figure 2
○
1 , and put them in a clear place, remove dirt and dust thereof, as following
5 to dismantle the cover of cable box, take out the protection chip, then, use a #7
○
2 to release the nut
○
2
○
to clean out the dust and accumulated dirt at the bottom, litter the
1
○
3 and washer
○
6
beside the machine, use a hose
49
○
4 , place them in safe place together
○
to extract the waste liquid into
3