Motionless Timeout; Motion Sensitivity - Datalogic Gryphom 4500 Series Product Reference Manual

Motionless Timeout

The period of time that must expire without detecting any motion, before the reader is
assumed to be in a motionless condition. The selectable setting is from 500 to 25,500
milliseconds in 100 millisecond increments. This option relates to such features as
Aimer On and Stand Mode/Object Detection scanning with respect to motion.
Select Motionless Timeout
$CMOTO
Make a mistake? Scan the CANCEL bar code to abort
and not save the entry string. You can then start
again at the beginning.

Motion Sensitivity

Sets the sensitivity level for motion detection wakeup. Choices are low, medium and
high.
$CMOSY00

Motion Sensitivity = Medium
$CMOSY02
To configure this feature, scan the ENTER/EXIT PRO-
GRAMMING MODE bar code above, then the bar
code at left followed by the digits from the Alphanu-
meric characters in
ing your desired character(s). End by scanning the
ENTER/EXIT bar code again.

020 = Motionless Timeout = 2 seconds
ENTER/EXIT PROGRAMMING MODE
Appendix D, Keypad
CANCEL
Motion Sensitivity = Low
$CMOSY01
Motion Sensitivity = High
PRODUCT REFERENCE GUIDE
represent-
235