Table of Contents
Advertisement
2.4.1 Static Aggregation Configuration
Static aggregation is a method of combining or bundling of multiple switch ports or NICs to form
a single etherchannel. For example, add port 1 and port 2 to Static Group 1.
Step 1
Select Model as Static in group 1, which indicates that the group is static aggregation.
Step 2
Select port 1 and port 2 in group 1 to add the two ports to static aggregation. See
Figure 2-5.
For 4-port PoE switch, you can configure up to 3 groups of static aggregation. Static
aggregation is different depending on different models of PoE switch. The actual
interface shall prevail.
Step 3
Click OK.
The port 1 and port 2 form a logical port.
Figure 2-4
Aggregation
Figure 2-5
Static configuration
Quick Settings 5
Advertisement
Table of Contents
