Table of Contents
Advertisement
2)
For the parameters, see Table 3-7.
Parameter
Pool Name
Type
IP
Subnet Mask
Lease Time
Gateway
3)
Click OK.
3.2.9 LLDP
LLDP (Link Layer Discovery Protocol) is a standard link layer discovery way. It can form its
main capabilities, management address, device No. and port No. as TLV (Type Length Value),
encapsulate it in LLDPDU (Link Layer Discovery Protocol Data Unit), and release it to its
neighbor. The neighbor will keep the received information in the form of standard MIB
(Management Information Base), so that the network management can query and judge the
communication state of the link.
LLDP
Step 1
Select Advanced > Seldom-used > LLDP.
The LLDP interface is displayed. See Figure 3-69.
Figure 3-68
Add pool
Table 3-7 Pool parameters
Description
DHCP address pool name, such as vlan2_test.
Two types: Network and Host.
Network: The network segment of an IP.
Host: A specific IP
The IP address of the host or the network.
The subnet mask of the host or the network.
Enter the lease time of the address pool.
Configure the default gateway of the address pool.
Advanced Settings 61
Advertisement
Table of Contents
