Table of Contents
Advertisement
Step 2
Click
Step 3
Configure DHCP mode.
Add VLAN interface first. See "3.1.1.2 IP and Route."
1)
Click Add in VLAN Mode.
The Add VLAN Mode interface is displayed. See Figure 3-66.
2)
Enter the VLAN range, such as 2-4.
3)
Click OK.
Step 4
Configure network segment of excluded IP.
Excluded IP refers to the IP reserved for the server, which will not assign to the client.
1)
Click Add in Excluded IP.
The Add Excluded IP interface is displayed. See Figure 3-67.
2)
Enter the IP address range, such as 192.168.100.2–192.168.100.50.
3)
Click OK.
Step 5
Add DHCP address pool.
1)
Click Add in Pool.
The Add Pool interface is displayed. See Figure 3-68.
in Global Mode, to enable DHCP Server function.
Figure 3-66
Add VLAN mode
Figure 3-67
Add excluded IP
Advanced Settings 60
Advertisement
Table of Contents
