Aggregation - Dahua DH-PFS4218-16GT2GF-240 Manual

Parameter
Port VLAN
Ingress Acceptance
Egress Tagging
Allowed VLANs
Step 4 Click Save.

3.1.4 Aggregation

Aggregation is to form the multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with the larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and
dynamically to enhance the link reliability.
3.1.4.1 Static Configuration
Step 1 Select Advanced > Common > Aggregation.
The Aggregation interface is displayed. See Figure 3-10.
Description
Add the port to a VLAN. By default, the port belongs to VLAN1. The
range is 1–4094.
Displays whether data can flow into the port. Only Hybrid supports the
configuration (By default, all date flows into the port under other
models). See the following situations:
 Tagged and Untagged: All data flows into the port.
 Tagged only: Only tagged data can flows into the port.
 Untagged only: Only untagged data can flow into the port.
Displays whether to tag the data that will egress the port. See the
following three situations:
 Untag Port VLAN: If the data flow tag is the same with PVID, the
tag will be peeled.
 Tag All: All data will be tagged.
 Untag All: All data will not be tagged.
Set the allowed VLAN.
Figure 3-10 Aggregation
Advanced Settings 18