3.2.3 Loop Protection
Detect the loop among the ports. After the device has detected the loop, it will break the loop.
Step 1
Select Advanced > Seldom-used > Loop Protection.
The Loop Protection interface is displayed. See Figure 3-42.
Step 2
Click
3.2.4 Security
3.2.4.1 User Management
You can add, edit, and delete the user.
Select Advanced > Seldom-used > Security > User Management. And the User
Management interface is displayed. See Figure 3-43.
Add user
Step 1
Click Add.
The Add User interface is displayed. See Figure 3-44.
Figure 3-42
Loop protection
to enable Loop Protection
Figure 3-43
User management
Advanced Settings 39