Table of Contents
Advertisement
Figure 3-33
Step 4
Click OK.
Step 5
Create ERPS.
1)
Select Advanced > Seldom-used > ERPS > ERPS Setting.
The ERPS Setting interface is displayed.
2)
Click Add.
The Add New ERPS interface is displayed.
3)
Set ERPS ID to be 1. See Figure 3-34.
4)
Set Port 0 to be1 and Port 1 to be 2.
5)
Set Port 0 APS MEP to 1 and Port 1 APS MEP to be 2.
6)
Set Port 0 SF MEP to be1 and Port 1 SF MEP to be 2.
7)
Click OK.
Configure the peer ID of MEP 2
Advanced Settings 34
Advertisement
Table of Contents
