Dahua DH-PFS4218-16GT2GF-240 Manual page 36

Step 2 Click Add.
The Add ERPS interface is displayed. See Figure 3-28.
Step 3 For the parameters, see Table 3-6.
Parameter
ERPS ID
Port 0
Port 1
Port 0 APS MEP
Port 1 APS MEP
Port 0 SF MEP
Port 1 SF MEP
Figure 3-27 ERPS configuration
Figure 3-28 Add ERPS
Table 3-6 ERPS parameters
Description
The ID number of ERPS.
The two ports added into the ERPS.
The corresponding protocol packet ERPS to ERPS port. Keep
Port 0 APS MEP consistent with Port 0 SF MEP. Keep Port 1
APS MEP consistent with Port 1 SF MEP. For example: Port 0
APS MEP is 1 and Port 1 APS MEP is 2.
The corresponding aggregation inspection MEP of ERPS port.
Keep Port 0 APS MEP consistent with Port 0 SF MEP. Keep Port
1 APS MEP consistent with Port 1 SF MEP. For example: Port 0
SF MEP is 1 and Port 1 SF MEP is 2.
Advanced Settings 30