Dahua DH-PFS4218-16GT2GF-240 Manual page 63

Step 2 Click
Every SNMP v3 agent has an engine ID as its unique identifier.
3.2.7.2 Configuring SNMP v1/v2
Example: Configure SNMP v1. The configuration of SNMP v2 is the same as that of SNMP v1.
Step 1 Select SNMP v1 in SNMP Version.
Step 2 Set the read-only community, read&write community, trap address and trap port.
Step 3 Click Save.
3.2.7.3 Configuring SNMP v3
Step 1 Select SNMP v3 in SNMP Version. See Figure 3-64.
Figure 3-63 SNMP
in SNMP to enable SNMP.
Advanced Settings 57