Quick Configuration; Software Setting; Network Setting; Ipc Configuration - Dahua MJHJ4P Quick Start Manual

2 Quick Configuration

2.1

Software Setting

IPC needs to configure IP address which should be the same as the IP address of NVR during use.

2.1.1 Network Setting

Step 1 Enter "Main Menu"> "System Setting"> "Network Setting"interface, as shown in Figure
2-1.
Figure 2-1
Step 2
Set corresponding IP address to the '' IP Address'', ''Subnet Mask'' and ''Default gateway'', click ''Save''.

2.1.2 IPC Configuration

The IP address of IPC and the IP address of ''Network Setting'' should be kept in the same network
segment.
- 5 -