Mac Table - Dahua DH-PFS4218-16GT2GF-240 Manual

Step 2 Select LACP (Passive) in the Mode area, and add the port member to the dynamic
aggregation group. For example, add port 3 and port 4 to aggregation Group 2. See
Figure 3-13.
Step 3 Select LACP (Passive) in the Mode area, and add the port member to the dynamic
aggregation group. For example, add port 5 and port 6 to aggregation Group 3. See
Figure 3-13.
Step 4 Click Save.

3.1.5 MAC Table

MAC (Media Access Control) Table records the relationship between the MAC address and the
port, and the information including the VLAN that the port belongs to. When the device is
forwarding the packet, it queries in the MAC address table for the destination MAC address of
the packet. If the destination MAC address of the packet is contained in the MAC address table,
the packet is forwarded through the port in the table directly. And if the destination MAC
Figure 3-12 LACP (1)
Figure 3-13 LACP (2)
Advanced Settings 20