Dahua DH-PFS4218-16GT2GF-240 Manual page 22

Step 2 For the parameters, see Table 3-3.
Parameter
Port
Link
Speed Duplex Status
Speed Duplex Setting
Flow Control State
Flow Control Setting
Ingress Limit Enable
Figure 3-8 Port configuration
Table 3-3 Port parameter
Description
Displays all ports of the switch.
Green Up indicates the port is connected successfully, and Red
Down indicates the port is not connected or the connection fails.
Down means disconnection, and the specific speed means
successful connection.
Full means full duplex; Half means half duplex.
Set the speed and the duplex mode.
The speed and duplex mode of combo port is fixed to Auto.
Displays flow control actual negotiator or enable status, including
ON and OFF.
ON: Negotiation succeeds.

 OFF: Negotiation fails.
ON/OFF flow control function.
: Flow control is ON.

: Flow control is OFF.

Enable/Disable ingress limit.
: Ingress enable is enabled.

: Ingress enable is disabled.

Advanced Settings 16