Dahua DH-PFS4218-16GT2GF-240 Manual page 18

2) For the parameters, see Table 3-1.
Parameter
VLAN
IP address
Mask Length
3) Click OK.
Step 3 Add the IP route.
1) Click Add in the Route Setting region.
The Add Route interface is displayed. See Figure 3-4.
2) For the parameters, see Table 3-2.
Parameter
Network
Mask Length
Next Hop
3) Click OK.
Figure 3-3 Add IP
Table 3-1 VLAN interface
Description
Enter VLAN number.
Set the IP address of the VLAN interface.
Set the mask length of the IP address.
Figure 3-4 Add route
Table 3-2 IP routes
Description
It is the destination of the IP packet.
Mask length, with destination address, is to identify the IP address of
the destination host or the route. After Logical AND between
destination address and network mask, you can get the IP address of
the destination host or the route.
The next hop IP of the route.
Advanced Settings 12