Table of Contents
Advertisement
Take 4-port PoE switch for example. The maintenance interface is different depending on the
models of switch. The actual interface shall prevail.
4.1
System Reboot
Step 1
Select Maintain > Common > System Reboot.
The System Reboot interface is displayed. See Figure 4-1.
Step 2
Click Reboot.
Step 3
Click Confirm, and the device reboots.
4.2
Restoring Default Settings
You can restore all the switch configurations to the factory defaults, except the VLAN1 IP
address of the switch.
Step 1
Select Maintain > Common > Restore Default.
The Default interface is displayed. See Figure 4-2.
Step 2
Click Default.
All the configurations, except VLAN1 IP address of the switch, have been restored to
factory defaults.
4.3
Config Manage
4.3.1 Exporting Config File
Step 1
Select Maintain > Common > Config Manage > Export.
4
Maintenance
Figure 4-1
System reboot
Figure 4-2
Restore default
Maintenance 69
Advertisement
Table of Contents
