Table of Contents
Advertisement
Parameter
Forwarding delay time
Bridge priority
4.4.2 Port Instance
Step 1
Select Network Settings > STP > Port Instance.
Step 2
Enter Priority and Root Path Cost of each port.
The value of Priority ranges from 0 to 240, and must be an integral multiple of 16.
4.5 Configuring Link Aggregation
Link aggregation is to form a multiple physical ports of the switch into the logical port. The multiple
links in the same group can be regarded as a logical link with a larger bandwidth.
Through aggregation, the ports in the same group can share the communication flow, to make a
larger bandwidth. Besides, the ports in the same group can back up reciprocally and dynamically to
enhance the link reliability.
● The link aggregation is mutually exclusive with STP mode, IGMP Snooping, and 802.1x mode.
When STP mode is enabled, link aggregation cannot be configured. You must disable STP mode
before configuring link aggregation.
● We do not recommend implementing configuration and advanced functions for the ports which
are used for link aggregation.
● Link aggregation can be divided into static aggregation and LACP. Generally, the peer devices
with the switch link aggregation are switch and network adapter.
Description
After setting topological change, the bridge maintains the time of
snooping and study state. The time ranges from 4 seconds to 30
seconds.
The value ranges from 0 to 61440.
Figure 4-5 Port instance
15
Advertisement
Table of Contents
