Table of Contents
Advertisement
Step 3
Click Save.
Step 4
Select Advanced > Seldom-used > QoS > DSCP-Based.
The DSCP-Based interface is displayed.
Step 5
When setting DSCP to be 4 and 8, the CoS is 2 and DPL are 2 and 1.
1)
When DSCP are 4 and 8, select Trust to enable the function. See Figure 3-60.
2)
When setting DSCP to be 4, CoS is 2 and DPL is 2.
3)
When setting DSCP to be 8, CoS is 2 and DPL is 1.
The larger the CoS of DSCP, the higher the priority. The corresponding port packet
will pass the egress port first.
Figure 3-59
Port classification
Advanced Settings 53
Advertisement
Table of Contents
