This user’s manual introduces the functions and operations of 24-Port 10/100 Mbps + 1-Port Gigabit Combo Base-T SFP multi-mode PoE Switch devices. Read carefully before using the device, and keep the manual safe for future reference. Models DH-PFS3125-24ET-190 Safety Instructions The following signal words might appear in the manual. Signal Words...
Page 3
User’s Manual About the Manual The manual is for reference only. Slight differences might be found between the manual and the product. We are not liable for losses incurred due to operating the product in ways that are not in ...
User’s Manual Important Safeguards and Warnings This section introduces content covering the proper handling of the device, hazard prevention, and prevention of property damage. Read carefully before using the device, and comply with the guidelines when using it. Electrical safety All installation and operation here should conform to your local electrical safety codes.
Page 5
User’s Manual Please make sure to use the same battery model if possible. We recommend replace battery regularly (such as one-year) to guarantee system time accuracy. Before replacement, please save the system setup, otherwise, you may lose the data completely.
User’s Manual Introduction Overview The Switch is a high performance multi-mode PoE switch. Provides twenty-four 10/100 Mbps Auto- Negotiation RJ-45 ports, plus one gigabit Combo ports, it can be used to link bandwidth higher upstream equipment. These PoE ports can automatically detect and supply power with those IEEE 802.3at compliant Powered Devices (PD) such as AP, IP Cameras or IP Phones, etc.
Page 8
User’s Manual Front panel LED indicators: The LED Indicators will allow you to monitor, diagnose and troubleshoot any potential problem with the Switch, connection or attached devices. LED indicator The following chart shows the LED indicators of the Switch along with explanation of each indicator. Table 1-1 Description of the indicator Faceplate LED Indicator...
User’s Manual Monitoring mode (MONITOR): 1 to 8 ports support port priority, optimize port cache, switch all ports can communicate with each other. Network extend mode(EXTEND): 1 to 8 port rate down to 10 Mbps, the farthest transmission distance of up to 250 meters, all ports can communicate with each other. 10/100 Mbps RJ-45 ports (1 to 24): Designed to connect to the device with a bandwidth of 10 Mbps, 100 Mbps.
Page 10
User’s Manual One Installation Component. One AC power cord. One User’s Manual. ...
User’s Manual Installation and Connection This part describes how to install your PoE Ethernet Switch and make connections to it. Please read the following topics and perform the procedures in the order being presented. Installation Please follow the following instructions in avoid of incorrect installation causing device damage and security threat.
User’s Manual Use the screws provided with the equipment rack to mount the Switch on the rack and tighten it. Rack installation 2.1.3 Powering on the Switch The Switch is powered on by the 100-240 VAC 50/60 Hz internal high-performance power supply. Please follow the next tips to connect: AC Electrical Outlet: It is recommended to use single-phase three-wire receptacle with neutral outlet or multifunctional...
IP video surveillance is not immune to cyber risks, but taking basic steps toward protecting and strengthening networks and networked appliances will make them less susceptible to attacks. Below are some tips and recommendations from Dahua on how to create a more secured security system.
Page 14
User’s Manual 1024–65535, reducing the risk of outsiders being able to guess which ports you are using. Enable HTTPS We suggest you to enable HTTPS, so that you visit Web service through a secure communication channel. MAC Address Binding We recommend you to bind the IP and MAC address of the gateway to the device, thus reducing the risk of ARP spoofing.
Page 15
User’s Manual Enable IP/MAC address filtering function to limit the range of hosts allowed to access the device. More information Please visit Dahua official website security emergency response center for security announcements and the latest security recommendations.