Aggregation - Dahua DH-PFS4218-16GT2GF-240 Manual

Step 2 Configure the port VLAN parameters. See Table 2-2.
Parameter
Port
Mode
Port VLAN
Allowed VLANs
Step 3 Click OK.
2.4

Aggregation

Add the port to the aggregation. For details, see "3.1.4 Aggregation."
Click Aggregation on Quick Setting interface, and the Aggregation interface is displayed.
See Figure 2-4.
Figure 2-3
Table 2-2 Port VLAN configuration parameter
Description
Displays all ports of the switch.
Three modes: Access, Hybrid, and Trunk.

Access: When the port connects to terminal devices (such as PC and
IPC), select Access.
 Trunk: When the port connects to switch, select Trunk.
 Hybrid: Not often used.
Add the port to a VLAN. By default, the port belongs to VLAN1, and the
range is 1–4094.
Set the allowed VLAN. When the mode is Trunk, you can set it.
VLAN
Quick Settings 4