Advanced Settings; Common Configuration; System Configuration - Dahua DH-PFS4218-16GT2GF-240 Manual

You can configure system, port, VLAN, aggregation, MAC table and other parameters on the
advanced settings interface. The advanced settings interface is different depending on the
models of switch, and the actual interface shall prevail. Take 4-port PoE switch for example.
3.1

Common Configuration

3.1.1 System Configuration

3.1.1.1 System Information
You can set the device name, IP address, mask length and DHCP enable, and view the
software information, hardware information and time.
Be careful when you enable DHCP Client. After enabling DHCP Client, the IP router or DHCP
server connecting to the switch will assign IP address to the switch automatically and the
existing IP address will be invalided, and then you cannot access the web interface.
Step 1 Select Advanced > Common > System Config > System Info.
The System Info interface is displayed. See Figure 3-1.
3

Advanced Settings

Advanced Settings 9