Detailed Self-Diagnostics - Ricoh Gestetner LANIER SAVIN G071 Service Manual

CONTROLLER SELF-DIAGNOSTICS

5.3.2 DETAILED SELF-DIAGNOSTICS

This detailed self-diagnostic test requires a loop-back connector (P/N: G0219350).
1. Turn off the machine and attach the loop-back connector to the parallel
interface.
2. Turn on the machine while pressing the "Online" key and "# Enter" key
together.
3. The machine automatically starts the self-diagnostics and prints the diagnostic
report after completing the test.
• Refer to the diagnostics report for the detected errors. The errors detected
during self-diagnostics can be checked with SP7-832-001 (Diag. Result).
• Refer to section 4.2 for details about the error codes.
G071
CÓPIA NÃO CONTROLADA
5-54
CÓPIA NÃO CONTROLADA
Rev. 04/2003
SM