Ricoh Gestetner LANIER SAVIN G071 Service Manual page 140

SP MODE TABLES
Mode No.
7
(Class 1, 2, and 3)
603* Proc_ErrorLog
1 Log 1
2 Log 2
3 Log 3
803* PM_Counter
1 PCU
2 Development: M
3 Development: C
4 Development: Y
5 Development: Bk
6 FusingUnit
7 Charger
8 Bank1_Feed
9 Bank2_Feed
804 PM_Clear
6 FusingUnit
7 Charger
8 Bank1_Feed
9 Bank2_Feed
100 AllReset
G071
CÓPIA NÃO CONTROLADA
Displays the process control error log.
[0 ~ 9999999 / 0 / 1 /step]
• 103: ID sensor unable to receive light
Reasons: ID sensor failure or incorrect
installation, BCU failure
• 104: ID sensor unable to receive reflection
Reasons: As for 103, plus: Uneven OPC belt
surface, foreign material on OPC belt
• 105: ID sensor unable to receive OPC reflection
Reasons: As for 103, plus: Uneven OPC belt
surface, foreign material on OPC belt
• 110: ID sensor defective imaging – Cyan
Reasons: Abnormal development bias, dirty bias
terminal, development unit incorrectly installed,
BCU failure
• 111: ID sensor defective imaging – Magenta
Reasons: As for 110
• 113: ID sensor defective imaging – Cyan
Reasons: As for 110, plus: Laser writing failure,
abnormal charge, loss of synchronization
• 114: ID sensor defective imaging – Magenta
Reasons: As for 110, plus: Laser writing failure,
abnormal charge, loss of synchronization
• 115: ID sensor defective imaging – Yellow
Reasons: As for 110, plus: Laser writing failure,
abnormal charge, loss of synchronization
• 116: ID sensor defective imaging – Black
Reasons: As for 110
• 118: Black not detected
Reasons: As for 110
•
123: ID sensor defective imaging – Black
Reasons: As for 110, plus: Laser writing failure,
abnormal charge, loss of synchronization
Displays the number of sheets printed for each current
unit.
[0 ~ 9999999 / 0 / 1 sheet/step]
• For clearing the counters, see SP7-804.
Clears the PM counters.
[0 ~ 1 / 0 / 1 /step]
• For displaying the counter, see SP7-803.
5-42
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
Rev. 04/2003
SM