Ricoh Gestetner LANIER SAVIN G071 Service Manual page 94

CONTROLLER ERROR TABLE
Code Description
828 Self-diagnostics error :
ROM [XXXX]: Detailed
error code
829 Self-diagnostics error:
optional RAM [XXXX]:
Detailed error code
835 Self-diagnostics error:
Centronics interface
[XXXX]: Detailed error
code
836 Self-diagnostics error:
Font ROM (standard)
838 Self-diagnostics error:
Font ROM (clock
generator)
850 Network interface error
851 IEEE1394 interface error
853 IEEE802.11b error - card
not detected (power-on)
854 IEEE802.11b error - card
not detected (during
operation)
855 IEEE802.11b error
856 IEEE802.11b interface
board error
857 USB interface error
detected.
860 HDD: Error detected at
power up (partition error,
unformatted disk,
incorrect disk type)
861 HDD: Reboot error
862 Defective sector
management maximum
863 HDD: Read error
864 HDD: CRC error
865 HDD: Access error
G071
CÓPIA NÃO CONTROLADA
Turn the main switch on and off.
Replace the ROM DIMM
Replace the controller.
Turn the main switch off and on.
Replace the RAM DIMM.
Replace the controller board.
Turn the main switch off and on.
Check the connection between the Centronics connector
and loop-back connector.
Reconnect the loop-back connector.
Replace the controller.
Turn the main switch off and on.
Replace the standard ROM-DIMM.
Replace the controller.
Turn the main switch off and on.
Replace the controller.
Turn the main switch off and on.
Replace the IEEE1394 interface board.
Replace the controller.
Check the wireless LAN card connection.
Replace the wireless LAN card.
Check the wireless LAN card connection.
Replace the wireless LAN card.
Check the wireless LAN card connection.
Replace the wireless LAN card.
Check the wireless LAN interface board connection.
Replace the interface board.
Check the USB connections, make sure that they are
securely connected.
Replace the controller board.
Turn the main switch off and on.
Reformat the HDD (SP 5-832-1 [HDD Init]).
Replace the HDD.
Turn the main switch off and on.
Check the connection between HDD and controller.
Check and replace the cables.
Replace the HDD.
Replace the controller.
Replace the HDD.
Turn the main switch off and on.
Replace the HDD.
Replace the controller.
Turn the main switch off and on.
Replace the HDD.
Turn the main switch off and on.
Replace the HDD.
4-10
CÓPIA NÃO CONTROLADA
Required Action
SM