Ricoh Gestetner LANIER SAVIN G071 Service Manual page 125

Rev. 01/2004
Mode No.
2
(Class 1, 2, and 3)
942 OPC_Lub_Intrvl
1 OPC_Lub_Intrvl
943 Discharge Tsld (Discharge Threshold)
1 Discharge Tsld
944 OPCLub:Lrg Area
1 Int
2 ImgAreaValue1
3 ImgAreaValue2
4 Sheets1
5 Sheets2
950 S_Reg._Adj.
1 M(2:P1b)
2 C(2:P1b)
3 Y(2:P1b)
SM
CÓPIA NÃO CONTROLADA
[10 ~ 200 / 50 / 10/step] DFU
When SP2-939 (OPC_Lub_Int) is set to on, the machine
lubricates the OPC belt and image transfer belt at the
interval (number of prints) set with this SP. Incoming
print jobs do not interrupt the lubrication.
Adjusts the threshold of discharge. DFU
[9.0 ~ 22.0 / 15.0 / 1.0 g/m
Enables/disables OPC lubrication after a certain amount
of images are printed. The lubrication timing depends on
SP2-944-2 to -5.
When high coverage images are continuously printed,
cleaning of the OPC may not be enough. To correct this,
OPC lubrication is carried out during printing (lubrication
time: around 34 seconds).
• On
• Off
When "on" is set, OPC lubrication is executed under
either of the following conditions:
Condition 1. The number of printouts since the
previous lubrication reaches the value in SP2-944-4;
and the average pixel coverage of those printouts
exceeds the value in SP2-944-2.
Conditions 2. The number of printouts since the
previous lubrication reaches the value in SP2-944-5;
and the average pixel coverage of those printouts
exceeds the value in SP2-944-3.
Adjusts the average pixel.
[50 ~ 800 / 500 / 10 /step]
[50 ~ 800 / 350 / 10 /step]
[10 ~ 80 / 30 / 1 /step]
[10 ~ 80 / 60 / 1 /step]
Colour registration adjustment: adjusts the start timing of
imaging for each color. DFU
[–3 ~ 3 / –1 / 2 line/step]
• 2 lines = 0.047566 ms (about 85
• +: Delays the start timing.
• –: Advances the start timing.
• The start timing is adjusted only in plain paper mode,
and when one of the following conditions is satisfied:
1) Between the two images on the transfer belt (when
two images are developed on the OPC at the
same time (
2) B4 SEF or larger (multi-print job)
[–3 ~ 3 / 0 / 2 line/step]
[–3 ~ 3 / 0 / 2 line/step]
5-27
CÓPIA NÃO CONTROLADA
SP MODE TABLES
Function / [ Setting ]
3
/step]
µ
m)
6.2))
"
G071