Paper Source Selection - Ricoh Gestetner LANIER SAVIN G071 Service Manual

Paper Source Selection

Tray Priority (Auto Tray Select)
The "Tray Priority" setting
determines the start of the tray
search when the user selects "Auto
Tray Select" with the driver. The
machine searches for a paper tray
with the specified paper size and
type.
When no tray contains paper that
matches the paper size and type
specified by the driver, the controller
stops printing until the user loads the
correct paper.
The "Tray Priority" setting can be
specified in the "Paper Input" menu.
(Menu/ Paper Input/ Tray Priority)
NOTE: The by-pass feed table is not
part of the tray search.
Tray Lock
If "Tray Lock" is enabled for a tray, the controller skips the "locked" tray in the tray
search process.
The "Tray Lock" setting can be specified in the "Paper Input" menu.
(Menu/ Paper Input/ Tray Lock)
NOTE: The by-pass feed table cannot be unlocked (Tray Lock is always enabled).
Manual Tray Select
If the selected tray does not have the paper size and type specified by the driver,
the controller stops printing until the user loads the correct paper.
SM
CÓPIA NÃO CONTROLADA
Priority Tray
Tray 1
Tray 2 (Optional)
Tray 3 (Optional)
6-63
CÓPIA NÃO CONTROLADA
CONTROLLER
Start of Tray Search
G070D555.WMF
G071