Ricoh Gestetner LANIER SAVIN G071 Service Manual page 142

SP MODE TABLES
Mode No.
7
(Class 1, 2, and 3)
835 HighDutyCnt
1 M
2 C
3 Y
4 Bk
836 Total Memory
1 Total Memory
850 P/J
1 P/J(1)
2 P/J(2)
3 P/J(3)
4 P/J(4)
5 P/J(5)
6 P/J(6–10)
7 P/J(11–20)
8 P/J(21–)
901 Assert Info (Assert Information)
1 File Name
2 # of Lines
3 Location
906* PMCounter-PREV
1 PCU
2 Development: M
3 Development: C
4 Development: Y
5 Development: Bk
6 FusingUnit
7 Charger
8 Oil
9 WasteTnr: OPC
10 WasteTnr: Belt
11 Toner: M
12 Toner: C
13 Toner: Y
14 Toner: Bk
15 Bank1_Feed
16 Bank2_Feed
17 Development: M
18 Development: C
19 Development: Y
20 Development: Bk
21 PCU
22 FusingUnit
910 Firmware PN
1 System
2 Engine
7 Finisher
9 Bank1
11 Mail Box
G071
CÓPIA NÃO CONTROLADA
Used for the toner revitalization process (SP3-971).
Counts the number of developments made during the
past 12 hours.
Displays the memory capacity in the controller system.
Print per job counters are displayed.
Records the location where the last problem (SC990)
was detected in the program. The data stored in this SP
is used for problem analysis.
[0 ~ 0 / 0 / 0 /step]
Displays the counters for the previous units.
[0 ~ 9999999 / 0 / 1 /step]
Displays the part numbers.
[0 ~ 0 / 0 / 0 /step]
5-44
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
Rev. 04/2003
SM