Auto Continue - Ricoh Gestetner LANIER SAVIN G071 Service Manual

Auto Continue

Overview
When this function is enabled, the machine waits for a specified period (0, 1, 5, 10,
15 minutes) for the correct paper size and type to be set in the tray. If the timer
runs out, the machine starts printing, even if there is no paper tray which matches
the paper size and paper type specified by the driver.
The machine searches for a paper tray in the following way.
• The interval can be set with the "System" menu in the User Tools.
(Menu/ System/ Auto Continue)
NOTE: The default setting for this feature is 'disabled'.
Auto Tray Select
When there is no paper tray that
matches the paper size and type
specified by the driver, the machine
searches for any tray that has paper,
and prints from the first tray it finds.
The start of the tray search is the
tray selected as the "Priority Tray."
Manual Tray Select
The machine prints from the selected
tray even if the paper size and type
do not match the setting specified
from the driver.
If "Auto Continue" is disabled, the
machine waits until the user loads
the correct paper in the tray.
G071
CÓPIA NÃO CONTROLADA
Priority Tray
Tray 2 (Optional)
Tray 3 (Optional)
6-64
CÓPIA NÃO CONTROLADA
Tray 1
CONTROLLER
Start of Tray Search
G070D555.WMF
SM