Ricoh Gestetner LANIER SAVIN G071 Service Manual page 114

SP MODE TABLES
Mode No.
2
(Class 1, 2, and 3)
301 8 4C/--/2
9 3C/--/3
10 4C/--/3
11 4C/--/4
12 --/--/1
13 --/--/2
14 --/--/3
15 --/--/last
16 DevStart
17 DevEnd
18 1C/1st/--
19 1C/2nd/--
20 2C/--/--
21 3C/--/--
22 4C/--/--
23 PowerOnRecovery
303* TransBeltEnv
1 1
2 2
305* TransBeltStart
1 BiasOnOff
G071
CÓPIA NÃO CONTROLADA
[3.0 ∼ 14.0 / 13.0 / 0.1 µA/step]
The second color toner image of 4-color printing
[3.0 ∼ 14.0 / 13.0 / 0.1 µA/step]
The third color toner image of 3-color printing
[3.0 ∼ 14.0 / 13.0 / 0.1 µA/step]
The third color toner image of 4-color printing
[3.0 ∼ 14.0 / 13.0 / 0.1 µA/step]
The fourth color toner image of 4-color printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
After the first color toner image
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
After the second color toner image
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
After the third color toner image
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
After the final color toner image
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Development start
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Development end
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Waiting for thick paper or OHP before creating the front
side image for 1-color printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Waiting for thick paper or OHP before creating the rear
side image for 1-color duplex printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Waiting for thick paper or OHP before creating an image
for 2-color printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Waiting for thick paper or OHP before creating an image
for 3-color printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Waiting for the thick paper or OHP before creating an
image for 4-color printing
[3.0 ∼ 14.0 / 7.0 / 0.1 µA/step]
Machine start and jam recovery
Adjusts the environmental threshold for the transfer belt.
[0 ~ 100.0 / 3.5 / 0.1 g/m
[0 ~ 100.0 / 19.0 / 0.1 g/m
Sets the bias for the image transfer start to on or off.
[0 ~ 1 / 1 / 1/step] DFU
• 0: Bias off
• 1: Bias on
5-16
CÓPIA NÃO CONTROLADA
Function / [ Setting ]
3
/step] DFU
3
/step] DFU
Rev. 01/2004
SM